Sony TV & Home A/V Connection Manual page 4

Hide thumbs Also See for TV & Home A/V:

3. Connect a component video cable to:

a. COMPONENT (Y/Pb/Pr) MONITOR OUT jack on the A/V receiver

b. Component (Y/Pb/Pr) VIDEO input jack on the TV

Note: Follow the instructions supplied with your A/V receiver to connect and test your speakers.

1. Turn on the TV.

2. Turn on the set-top box.

3. Turn on the A/V receiver.

4. Select the component video input on the A/V receiver to which the set-top box is

connected, for example TV/SAT.

5. Tune the TV to the component video input to which the A/V receiver is connected, for

example VIDEO 5.

If there is picture on the TV and sound from your A/V receiver speakers, you have

connected your equipment correctly.

Watch satellite or cable TV

1. Turn on the TV.

2. Turn on the set-top box.

3. Turn on the A/V receiver.

4. Select the component video input on the A/V receiver to which the set-top box is

connected, for example TV/SAT.

5. Tune the TV to the component video input to which the A/V receiver is connected, for

example VIDEO 5.

6. Tune the set-top box to the desired channel.

The input jacks on an A/V receiver, with the exception of the PHONO IN jack, are

interchangeable, for example, you may connect a CD player into an input marked MiniDisc.

If you are connecting a turntable and the volume is low, the turntable may not have a built in

pre-amplifier. Use the PHONO IN jack on the A/V receiver if one is available. Do not connect

other devices to this jack.

The connection instructions are the same for all audio devices. Repeat the connection

instructions for each of your audio devices.