Sony NSZ-GT1 Connection Manual page 2

To connect the internet tv box to an av receiver

Hide thumbs Also See for NSZ-GT1:

When pictures from the

Cable/Satellite Box are not

displayed

If you are using an AV Receiver, pictures from the Cable/Satellite Box may not be displayed

properly during the Initial Setup or Setting screen even though the Cable/Satellite Box is

connected to the Internet TV Box.

Initial Setup screen*

In this case, try the following.



Make sure that HDMI cables are connected securely to the Cable/Satellite Box and to the

Internet TV Box.



Turn the Cable/Satellite Box off, then turn it on again.

When the Internet TV Box and TV are connected with HDMI cables via an AV Receiver,

pictures may not be displayed even if you try the steps suggested above. In this case,

try reconnecting the Internet TV Box directly to the HDMI input of the TV. (Refer to

Method 2 on the front side of this sheet.)

Pictures may not be displayed properly because of the copyright protection feature of some

Cable/Satellite Boxes when the Internet TV Box and TV are connected with HDMI cables via

an AV Receiver. In this case, contact your Cable/Satellite TV Operators.

There is no picture.

* The illustrations may differ from the actual display.

Printed in China

Video input settings screen in the

Settings menu*

Sony NSZ-GT1 4-270-510-11 (1)

4-270-510-11(1)