Sony NSZ-GT1 Quick Setup Manual

Quick Setup Guide
NSZ-GT1
Connection
Preparation
In the Box
Before connecting the BD player
BD Player

Active Media Controller

 Battery
 Quick Setup Guide
Reference Guide

Warranty Card

 HDMI Cable
 IR Blaster Cable
TV or A/V Receiver
 AC Power Adaptor
 AC Power Cord
HDMI Cable
* Connection method differs depending on whether the STB
Inserting batteries
supports MDCP (Media Device Control Protocol) or not.
If you do not know whether it supports MDCP or not, see the
following web site:
http://www.google.com/supprt/
LAN Cable
Router
* STB (Cable Box or Satellite Receiver)
When connecting the STB to the network
AA-size (R6)
step Connect to the A/V device
Disconnect the STB from the connected A/V device and then
connect the BD player between the STB and A/V device.
And connect the IR Blaster to the IR BLASTER port, and place
the IR Blaster near the remote sensor of the STB.
TV or A/V Receiver
 Even if connecting the BD player to the TV,
you can control the A/V receiver by using the
HDMI Cable
IR Blaster.
BD Player
HDMI Cable IR Blaster
STB Router
(Cable Box or Satellite Receiver)
When the STB supports MDCP (Media Device Control Protocol),

you can control the STB via a LAN connection.
If your connection method differs from the illustrated method, see the Web Guide. (http://www.sony.com/btv/webguide/)
Note
step Connect to a network
Connect the BD player and a router with a LAN cable or Wireless LAN.
For details of network connection with the STB,

see the operating instructions supplied with the STB.
TV or A/V Receiver
BD Player
LAN Cable Wireless LAN
STB (Cable Box or Satellite Receiver) Router
step Connect to the power source
Connect the AC adaptor and the power cord to the BD player
and the wall outlet.
step Change the display on your TV
Switch the input selector on your TV so that the signal from the
player appears on your TV screen.
step
Press the / (on/standby) button
step Set up the BD player
Follow the on-screen instructions of the Initial Setup wizard to set up the
BD player.
It
takes about 10 minutes to complete the Initial Setup.
