Battery Installation - Power Wheels Ford F-150 K8285 Owner's Manual & Assembly Instructions

IMPORTANT! Use only a Power Wheels
rechargeable battery with built-in thermal fuse. Use of any other
battery will damage your vehicle. Make sure that you charge the
battery for at least 18 hours using the enclosed Power Wheels
12 volt charger before operating your vehicle for the first time.
Charge the battery for at least 14 hours after each use of the vehicle.
Never charge the battery longer than 30 hours. Failure to follow these
instructions may damage your battery and will void your warranty.
®
Power Wheels
12 Volt Battery
Motor Harness
Connector
1
• Lift the hood.
• Plug the motor harness connector into the battery.

BATTERY INSTALLATION

® 12 volt lead-acid
®
18
Battery Retainer
2
• First lift and then slide the battery retainer toward you.
• Then, place the battery in the battery compartment. Make sure the
battery retainer slides over the top of the battery.
• Close the hood.
K8285a-0920