To Recenter The D-Bar; To Proceed Direct To Another Waypoint; Cancelling Direct To Operation - Honeywell KLN 90B GPS Abbreviated Operation Manual

• Press D. The Direct To page is displayed on the left side and it con-
tains the desired waypoint identifier.
• Press E to approve the waypoint page displayed on the right side.
The right side will display the NAV 1 page, and the left side will return to
the page which was displayed prior to pressing D (unless the NAV 1
page was on the left side in which case the pages will revert to the state
they were in prior to the direct to operation). The selected waypoint is
now the active Direct To waypoint.

4.4 To Recenter The D-Bar

If you get off course and wish to recenter the left/right deviation bar (D-
Bar) to proceed direct to the same waypoint:
• Select a non-waypoint page (NAV, D/T, REF, or CTR) or the active way-
point page on the right side.
• Press D. The Direct To page is displayed on the left, containing the
active waypoint identifier.
• Press E.

4.5 To Proceed Direct To Another Waypoint:

You may proceed Direct To another waypoint other than the active one by
using Direct To procedure A, B, or C at any time.

4.6 Cancelling Direct To Operation

The primary reason for wanting to cancel Direct To operation is to return
to flight plan operation which is described later in section 13.0, "OPER-
ATING FROM THE ACTIVE FLIGHT PLAN". To cancel Direct To opera-
tion:
• Press D
• Press @
• Press E
15