Honeywell RAPID EYE MULTI-MEDIA Operator's Manual page 89

5.
6.
7.
Honeywell recommends storing stills and clips in their own folder.
Clips and stills can be erased routinely after use, making it easy to erase other files by
mistake. Storing clips and stills in a folder other than View's application folder (the
default folder for clips and stills) prevents the deletion of View system files.
7.1.3 Clip: Name Reference
Table 17 explains each part of a clip's filename, using as an example:
402 Lalu Drive_LTZ_2002_12_04_13_31_14.REM . Note the ".REM" extension of the
file.
Table 17
Default format for Multi clip names
Example*
402 Lalu Drive
LTZ
2002
12
04
13
51
14
.rem
REM File
* See the clip listed in figure 67.
You have the option of renaming clips.
See 7.1.1, above. Leaving the ".REM" file extension is recommended.
7.1.4 Automatic Clip of Alarms
You can set View to make a clip automatically during a "live alarmed" session. The
opportunity to save the clip (or discard it) is offered when the session is closed. See the
Automatic record for live alarm option in 6.1.1: Customizing Alarms, starting on p. 6–2.
When all the video you need is recorded, click
Retrieval at [site name]: Save Recorded Clip to File.
As you would with any file, name the clip and choose a folder where the clip will
be stored. When you save the clip, it is stored as a *.rem file and the ...Save...
dialog is closed.
You have the option of ending the session. See 3.4, on p. 3–8.
Format element
site name
time reference
four digit year
two digit month
two digit day
two digit hour, 24 hour clock
two digit minute
two digit second
Microsoft Windows file extension
file "Type" in Microsoft Windows' Explorer
Clips and Stills
again. A dialog is displayed:
7–3