Operating Your Thermostat; Setting The Mode Of Operation - Heat, Cool, Etc - Aprilaire 8570 Owner's Manual

OPERATING YOUR THERMOSTAT

Backlight Operation
When any button is pressed, the backlighting will
illuminate. Once the backlight is on, subsequent button
presses will perform their respective tasks.
Using the Up & Down Buttons and Multi-Function
Buttons on the Thermostat
This thermostat uses a menu driven display and four (4)
buttons. The Up and Down buttons are generally used
to move between selections in the menu and to raise
and lower different parameters such as temperature,
days, minutes etc., depending on which screen you are
viewing. The multi-function buttons have a variety of
uses. The portion of screen directly above these
buttons will display the button's function. For instance,
when the main screen is being viewed, the buttons are
titled INFO and MENU from left to right respectively.
To access the menu of the thermostat, press the right
multi-function button.
4
Notes on Temperature Adjustments
The Cool setting must always be 2° or 5° (F or C)
higher than the Heat setting. The value (2° or 5°) is
selectable. The thermostat will automatically change
the temperature setting not being adjusted to maintain
this difference, even if both settings are not shown on
the display.
1. Setting the Mode of Operation – Heat, Cool, etc.
The thermostat can be set to OFF, HEAT, COOL, AUTO and EMERGENCY HEAT (EMERGENCY HEAT
for heat pumps only) modes. To set the mode, press the MENU button on the main screen.
Once in the Main Menu screen, use the down button to move the highlighted text to the desired
mode, then press SELECT.
Example: Placing thermostat in HEAT MODE.
9/11/05 5:15PM MAIN MENU 9/11/05
OUTDOOR OFF MODE SET MODE: OUTDOOR
OFF
45° FAN AUTO 45°
AUTO
COOL
HEAT HEAT
72° 72°
SET FAN:
AUTO
ON
MORE
INFO MENU EXIT SELECT
INFO MENU
CAUTION: Do not set to OFF mode during periods when freezing temperatures could occur.
NOTE: When installed with an Aprilaire ® Model 6504 you will be given the option to CHANGE ALL
THERMOSTATS. If you select YES to this, the mode setting will be set to whatever you have selected
for all the thermostats on the system.
5:15PM
HEAT MODE
FAN AUTO
SETPOINT
HEAT 74
5