Installing Usb2.0 Driver - AOpen MX4GR Online Manual

M X 4 G R
M X 4 G R
I n s t a l l i n g U S B 2 .
I n s t a l l i n g U S B 2 .
* Windows 2000 Installation Guide
*************************************************
Installing Driver in Existing Windows 2000 System
*************************************************
After enabling the USB 2.0 controller and rebooting your system, Windows 2000 setup will
show a "New Hardware Found" dialog box. Under Windows 2000, "Universal Serial Bus (USB)
Controller" will be displayed.
1. Choose "Search for a suitable driver for my device (Recommended)". from the list, and
then press "Enter".
2. Choose "Specify a location." and then press "Next"
3. Insert the Bonus CD in CD-ROM.
4. Type "[CD-ROM]:\Driver\Intel\USB2.0" in the text box that appears. Press " OK ".
5. Click on "Next." A message informing you that Windows has found "Intel (R) USB Enhanced
Host Controller (ICH4)" should appear.
6. Click on "Next," and then on "Finish."
************************************
Confirming Windows 2000 Installation
************************************
1. From Windows 2000, open the Control Panel from "My Computer" followed by the System icon.
2. Choose the "Hardware" tab, and then click the "Device Manager" tab.
3. Click the "+" in front of "Universal Serial Bus controllers". "Intel (R) USB Enhanced
Host Controller (ICH4)" should appear.
0 D r i v e r
0 D r i v e r
70
O n l i n e M a n u a l
O n l i n e M a n u a l