Table of Contents
Advertisement
Safety information
This device complies with the relevant safety regulations for data
processing equipment, including electronic office machines for use in
an office environment.
If you have any questions, contact your sales outlet or an AOpen
customer service centre.
Caution:
be performed by technicians, service personnel or technical
specialists. Equipment repairs should only be performed by
qualified staff. Any failure to observe the guidelines in this
manual could expose the user to risks (electric shock, fire hazards)
and could also damage the equipment. Note that any
unauthorized opening of the device will result in the invalidation
of the warranty and exclusion from all liability.
Before setting up
•
During installation and before operating the device, observe the
instructions on environmental conditions for you device (refer to
page 7).
•
If the device is brought in from a cold environment, condensation
may form both inside and on the outside of the machine.
Before operating the device, wait until it is absolutely dry and has
reached approximately the same temperature as the installation
site. Failure to observe these guidelines can lead to material
damage of the device.
•
Transport the device only in the original packaging or in a
packaging which protects it from knocks and jolts.
Installation and operation
•
The server automatically adjusts to a mains voltage between 100 V
to 127 V and/or 200 V to 240 V. The server may be place in
operation only, if the mains voltage range set on the server
corresponds to the local mains voltage.
•
This device has a safety tested power cable and must only be
connected to a properly grounded power socket.
The actions described in these instructions should only
vii
Advertisement
Table of Contents
