Table of Contents
Advertisement
Connection Type
Idle Time
Click <OK> when you have finished the configuration above. Congratulations! You have
completed the configuration for the PPPoE connection. You can start using the router now.
not wish to set a maximum packet size.
If you select "Continuous", the router will always connect to
the ISP. If the WAN line breaks down and links again, the
router will auto-reconnect to the ISP.
If you select "Connect On Demand", the router will
auto-connect to the ISP when someone wants to use the
Internet and keep connected until the WAN idle timeout. The
router will close the WAN connection if the time period that no
one is using the Internet exceeds the "Idle Time".
If you select "Manual", the router will connect to ISP only
when you click "Connect" manually from the Web user
interface. The WAN connection will not disconnected due to
the idle timeout. If the WAN line breaks down and later links
again, the router will not auto-connect to the ISP.
You can specify an idle time threshold (minutes) for the WAN
port. This means if no packets have been sent (no one using
the Internet) during this specified period, the router will
automatically disconnect the connection with your ISP.
Advertisement
Table of Contents
