Table of Contents
Advertisement
Rear Panel
The figure below shows the rear panel of the Broadband Router.
-
+
RESET
II
WAN
X
3
2
1
4
Rear Panel
WAN
There are two RJ-45 ports for the WAN, the port can be either
connected to "II" which is for hub/switch and "X" port for crossover,
and this will fit the xDSL/Cable modem's specification need.
Only
NOTE:
one port can be plug-in to the WAN port, either the "II" port
or "X" port.
LAN (1-4)
Four RJ-45 10/100Mbps auto-sensing ports for connecting to either
10Mbps or 100Mbps Ethernet connections.
RESET
Use a pin-shape item to push to reset this device to factory default
settings. It will be useful too when the manager forgot the password to
login, but the setting will be back to default setting.
8
Advertisement
Table of Contents
