Location Of The Spare Tire And Tools; Removing The Jack And Tools; Removing The Spare Tire - Ford 2005 Freestar Owner's Manual

Tires, Wheels and Loading

Location of the spare tire and tools

The spare tire and tools for your vehicle are stowed in the following
locations:
Item
Spare tire
Jack
Jack handle
Flat tire tether, wing screw
Jack extension tool (cargo van
model only)

Removing the jack and tools

1. Locate the access panel on the interior trim. Rotate the panel
retaining clip and remove the panel.
2. Remove the jack and lug nut wrench by turning the thumbscrew
counterclockwise to relieve tension against the stowage bracket.

Removing the spare tire

1. Wagon only: Open liftgate and
lift flap in the carpeting on the rear
tub cargo floor to expose the hex
nut. Insert the lug nut wrench on
the hex nut in cargo floor.
Cargo van only: Lift flap in mat to
expose hex nut. Insert extension
tool through access hole and engage
hex nut. Place lug wrench onto end
nut of extension tool.
186
2005 Freestar (win)
Owners Guide (post-2002-fmt)
USA (fus)
Location
Under the vehicle, just forward of
the rear bumper.
Behind the access panel located
on the right rear quarter panel
interior trim.
Attached to the jack with a clip.
Inside tire tether kit, next to jack.
Attached to the jack kit.