Before Installing The Intellex; Safety Guidelines - American Dynamics Intellex Installation And Configuration Manual

Safety Guidelines

• Ensure that installation work complies with electrical, fire, safety, communication, and building
codes and ordinances.
• Install the Intellex in a clean, dry location, where temperature and humidity are within product
specifications.
• Install the Intellex away from Electrical Magnetic Inducing (EMI) equipment, such as electrical
generators, motors, unshielded speakers, and high voltage cables.
• Allow adequate all-around clearance and accessibility for cables, peripherals, ventilation,
maintenance, and operation.
• Ensure that equipment is mounted level and securely.
• Ensure that equipment has a stable AC power source.
• Use of an Uninterruptible Power Supply (UPS) unit is highly recommended. UPS units protect
critical computing systems from power fluctuations and losses that may cause loss of data or
damage to the system.
• Install surge protectors on all power cables to protect against severe power fluctuations.
• Check the product label for power supply requirements to assure that no overloading of power
supply circuits or overcurrent protection occurs.
• Ensure that fans undergo periodic, scheduled maintenance and remain free and clear of dust.
• Electrical grounding must be reliable and uncompromised by any connections.
Note
The power supply automatically detects 115 or 230 volts input and has no power switch.
• Locate product documentation and software, and keep in a safe and accessible location.
• For all rack-mounted electrical equipment, ensure adequate air flow around the unit for safe
operation. The maximum temperature for rack-mounted units is 35° C or 95° F.
Note
Refer to the Intellex Ultra Quick Setup Guide for a visual overview of system contents, how to set
up and connect the components, and how to power up the unit.

Before Installing the Intellex

1