Troubleshooting; Master Dimmer - American DJ Mega Panel LED User Instructions

Mega Panel LED™
First unplug the power. The fuse holder is located next to the power
cord. Using a phillips screw driver unscrew the fuse holder. Remove
the bad fuse and replace with a new one.
Mega Panel LED™
Listed below are a few common problems the user may encounter,
with solutions.
Unit not responding to DMX:
1. Check that the DMX cables are connected properly and are
wired correctly (pin 3 is "hot"; on some other DMX devices
pin 2 may be 'hot'). Also, check that all cables are connected
to the right connectors; it does matter which way the inputs
and outputs are connected.
2. Some DMX modes have a dimmer channel. Make sure the dim-
mer channel is not at 0%
Unit does not respond to sound:
1. Quiet or high pitched sounds will not activate the unit.
2. Check the sound sensitivity level. See Sound Active mode.
If problems are not resolved; Contact American DJ® for service.
1-800-322-6337
American DJ - www.americandj.com - Mega Panel LED™ User Manual Page 11
© ®
Fuse Replacement
Trouble Shooting
Mega Panel LED™ DMX Values & Functions - 3 Channels
Channel Value
1
1 - 255
2
1 - 255
3
1 - 255
Mega Panel LED™ DMX Values & Functions - 4 Channels
Channel Value
1
1 - 255
2
1 - 255
3
1 - 255
4
1 - 255
American DJ - www.americandj.com - Mega Panel LED™ User Manual Page 12
© ®
Function
RED
0% - 100%
GREEN
0% - 100%
BLUE
0% - 100%
Function
RED
0% - 100%
GREEN
0% - 100%
BLUE
0% - 100%

MASTER DIMMER

0% - 100%