Ford 2003 Mustang Owner's Manual page 23

Controls and features
Turning the EATC off
Press OFF. The
AUTO
Outside Temperature
function will continue
OFF
OUT
to operate until the
SIDE
TEMP
MAX
ignition is turned off.
A/C
VENT
Automatic operation
Press AUTO and select the desired temperature.
The selected temperature and the word AUTO will
appear in the display window. The EATC system will
either heat or cool to achieve the selected
temperature. The system will automatically
determine fan speed, airflow location and if fresh
outside air or recirculated air is required. Fan speed
remains automatic unless the fan speed control is
pressed.
When in AUTO and weather conditions require heat,
air will be sent to the floor. However, if the engine is
not warm enough to provide heat, the fan will be at
a low speed and the air will be directed to the
windshield. In 3 1 ⁄ minutes or less, the fan speed will
2
start to increase and the airflow location will change
to the floor area.
If unusual conditions exist (i.e.-window fogging,
etc.), the manual override controls allow you to
select airflow locations and the fan control allows
you to adjust fan speed as necessary.
Temperature selection
The display window
AUTO
indicates the selected
F
temperature, function
(AUTO or one of the
override controls) and
FAN
• • •
manual control of fan
speed ( ) if
automatic fan speed is not desired.
23