Troubleshooting - American DJ Mega Bar LED User Instructions

Mega Bar LED™ DMX Values and Functions - 7 Channels
Channel Value
1 0 - 255
2 0 - 255
3 0 - 255
4
0 - 14
15 - 28
29 - 42
43 - 56
57 - 70
71 - 84
85 - 98
99 - 112
113 - 126
127 - 140
141 - 154
155 - 168
169 - 182
183 - 196
197 - 210
211 - 224
225 - 238
239 - 255
5 SPEED/SOUND SENSITIVITY CONTROL*
0 - 255
6
0
1 - 255
7
0
1 - 255
*When the Channel 4 fader level is between the values of 15 and 236, the Channel 5
fader will control the speed of the macro/program.
When the Channel 4 fader is between 239 and 255 (Sound Active) the Channel 5
fadder will control the sound sensitivity level. Channel 5 will start at least sensitive to
most sensitive.
American DJ® - www.americandj.com - Mega Bar LED™ Instruction Manual Page 15
©
Function
RED
0% 100%
GREEN
0% 100%
BLUE
0% 100%
MACROS/PROGRAMS
OFF
RED
YELLOW
GREEN
CYAN
BLUE
PURPLE
WHITE
COLOR CHANGE
COLOR FLOW
COLOR DREAM
MULTI COLOR
DREAM FLOW
2 COLOR FLOW
COLOR CHANGE FADE
COLOR FLOW FADE
2 COLOR FLOW FADE
SOUND ACTIVE
SLOW FAST
STROBE
OFF
SLOW FAST
DIMMER
OFF
0 100&
Mega Bar LED™
First unplug the power. The fuse holder is located next to the power
cord. Using a flat-head screw driver unscrew the fuse holder. Remove
the bad fuse and replace with a new one.
Mega Bar LED™
Listed below are a few common problems the user may encounter,
with solutions.
Unit not responding to DMX:
1. Check that the DMX cables are connected properly and are
wired correctly (pin 3 is "hot"; on some other DMX devices
pin 2 may be 'hot'). Also, check that all cables are connected
to the right connectors; it does matter which way the inputs
and outputs are connected.
Unit does not respond to sound:
1. Quiet or high pitched sounds will not activate the unit.
If problems are not resolved; Contact American DJ® for service.
1-800-322-6337
American DJ® - www.americandj.com - Mega Bar LED™ Instruction Manual Page 16
©
Fuse Replacement
Trouble Shooting