Master Dimmer; Troubleshooting - American DJ Mega Tripar Profile User Instructions

Mega Tripar Profile 7 Channel - DMX Values & Functions
C V
hannel alue
1
1 - 255
2
1 - 255
3
1 - 255
4 1 - 255
(See 1 Channel DMX mode for colors)
5
0 - 15
16 - 255
6
0 - 127
128 - 135
136 - 143
144 - 151
152 - 159
160 - 167
168 - 175
176 - 183
184 - 191
192 - 199
200 - 207
208 - 215
216 - 223
224 - 231
232 - 239
240 - 247
248 - 255
7
1 - 255
Channels 1, 2, and 3 will not work, when Channel 4 is being used.
When using Channel 6 values 128-239, Channel 5 will control the speed of the programs.
When using Channel 6 values 240-255, Channel 5 will control the sound sensitivity.
American DJ - www.Americandj.com - Mega Tripar Profile User Manual Page 17
© ®
Function
RED
0% - 100%
GREEN
0% - 100%
BLUE
0% - 100%
COLOR MACROS
STROBING/PROGRAM SPEED
NOTHING
STROBING/SPEED CONTROL
SLOW - FAST
PROGRAMS
OFF
COLOR DREAMING 1
COLOR DREAMING 2
COLOR DREAMING 3
COLOR DREAMING 4
COLOR DREAMING 5
COLOR DREAMING 6
COLOR DREAMING 7
COLOR DREAMING 8
COLOR CHANGE 1
COLOR CHANGE 2
COLOR CHANGE 3
COLOR CHANGE 4
COLOR CHANGE 5
COLOR CHANGE 6
SOUND ACTIVE MODE 1
SOUND ACTIVE MODE 2

MASTER DIMMER

0% - 100%
Mega Tripar Profile
With this feature you can connect the fixtures to one another
using the IEC input and output sockets. The quantity that can be
connected is 33 fixtures maximum. After 33 fixtures you will need
to use a new power outlet. They must be the same fixtures. DO
NOT mix fixtures.
Mega Tripar Profile
Disconnect the unit from its power source. Remove the power cord
from the unit. Once the cord has been removed, you will find that the
fuse holder is located inside the power socket. Insert a flat-head screw
driver into the power socket and gently pry out the fuse holder. Remove
the bad fuse and replace with a new one. The fuse holder also has a
holder for a spare fuse.
Mega Tripar Profile
Listed below are a few common problems the user may encounter,
with solutions.
Unit not responding to DMX:
1. Check that the DMX cables are connected properly and are
wired correctly (pin 3 is "hot"; on some other DMX devices
pin 2 may be 'hot'). Also, check that all cables are connected
to the right connectors; it does matter which way the inputs
and outputs are connected.
Unit does not respond to sound:
1. Quiet or high pitched sounds will not activate the unit.
2. Make sure that Sound Active mode is activated.
Mega Tripar Profile
Due to fog residue, smoke, and dust cleaning the internal and exter-
nal optical lenses must be carried out periodically to optimize light
output.
1. Use normal glass cleaner and a soft cloth to wipe down the
outside casing.
2. Clean the external optics with glass cleaner and a soft cloth
every 20 days.
3. Always be sure to dry all parts completely before plugging
the unit back in.
Cleaning frequency depends on the environment in which the fixture
operates (i.e. smoke, fog residue, dust, dew).
American DJ - www.Americandj.com - Mega Tripar Profile User Manual Page 18
© ®
Power Cord Daisy Chain
Fuse Replacement
Trouble Shooting
Cleaning