Operation - American DJ Quad Phase HP User Instructions

Quad Phase HP
DISP -
This function will reverse the display 180º.
1. Pres the either the MENU button until "DISP" is displayed,
press ENTER.
2. Press the UP button to select "DSIP" to activate this func-
tion, or "DISP" to deactivate this function.
3. Press ENTER to confirm.
TEST -
This function will run a self test program .
1. Press the MENU button until "TEST" is displayed, press ENTER.
2. The unit will now run a self test. Press the MENU button to exit.
TEMP
- With this function you can display the running
temperature of the unit.
1. Press the MENU button until "TEMP" is displayed, press
ENTER.
2. The current running temperature of the fixture will now be
displayed. Press MENU to exit.
FHRS
- With this function you can display the running
time of the unit.
1. Press the either the MENU button until "FHRS" is displayed,
press ENTER.
2. The display shows the running time of the unit. Press MENU
to exit.
VER
- Use this function to display the Software version of
the unit.
1. Press the either the MENU button until "VER" is displayed,
press ENTER.
2. The display will show the software version.
ADJ Products, LLC - www.adj.com - Quad Phase HP Instruction Manual Page 11
System Menu Quad Phase HP
Universal DMX Control:
universal DMX-512 controller to control the chases and patterns,
dimmer and strobe. A DMX controller allows you to create unique
programs tailored to your individual needs.
1. The Quad Phase HP is a four DMX channel DMX fixture. See
page 14 for detailed description of the DMX values and traits.
2. To control your fixture in DMX mode, follow the set-up procedures
on pages 5-7 as well as the set-up specifications that are
included with your DMX controller.
3. Use the controller's faders to control the various DMX fixture traits.
4. This will allow you to create your own programs.
5. Follow the instructions on page 8 to set the DMX address.
6. For longer cable runs (more than a 100 feet) use a terminator on
the last fixture.
7. For help operating in DMX mode consult the manual included
with your DMX controller.
Sound Active Mode:
linked together, to run to the beat of the music.
1. Tap the MENU button until "SOUN" is displayed, and press ENTER.
2. Press the UP or DOWN button so that "ON" is displayed. The unit
will now run to the beat of the music.
3. The sound sensitivity can be adjusted by pressing the MENU
button until "SENS" is displayed, and then press ENTER. Use the
UP or DOWN buttons to adjust the sound sensitivity, 1 being the
least sensitive, and 100 being the most sensitive.
4. The optional UC3 Controller (not included) may be used to con-
trol different functions including blackout.
Master-Slave Operation (Sound Active):
you to link up to 16 units together and operate without a controller. The
units will be sound activated. In Master-Slave operation one unit will
act as the controlling unit and the others will react to the controlling
units programs. Any unit can act as a Master or as a Slave.
1. Using standard XLR microphone cables, daisy chain your units
This function allows you to use a Elation
This mode allows a single unit or several units
ADJ Products, LLC - www.adj.com - Quad Phase HP Instruction Manual Page 12

Operation

®
This function will allow