Operation - American DJ Galaxian Royale User Instructions

Galaxian Royale
2. The display will show either "ON" or "OFF". Press the UP or
DOWN buttons to select "ON" to keep the LED display on at
all times, or "OFF" to switch to have the LED display switch off
after 10 seconds.
3. Press ENTER and then hold MENU for at least 2-3 seconds
to confim.
DISP
- This function will reverse the display 180º.
1. Tap the MENU button until "DISP" is displayed, press ENTER.
2. The display will show either "DISP" or "DSIP". Press the UP or
DOWN buttons to select "DISP" to keep the LED display normal,
or "DSIP" to 'flip" the LED display 180 ̊ .
3. Press ENTER and then hold MENU for at least 2-3 seconds
to confim.
TEST
- This function is a self-test program.
1. Tap the MENU button until "TEST" is displayed, press ENTER.
The unit will now run a self-test program
FHRS
- With this function you can display the running time
of the fixture.
1. Tap the MENU button until "FHRS" is displayed, press
ENTER.
2. The display shows the running time of the unit. Press MENU
to exit.
VER
- With this function you can display the version soft-
ware of the unit.
1. Tap the MENU button until "VER" is displayed, press ENTER.
2. The display will now display the version of software. Press
MENU to exit.
American DJ - www.americandj.com - Galaxian Royale Instruction Manual Page 13
© ®
System Menu Galaxian Royale
CAUTION IMPORTANT! When installing this projector, make sure
that it is mounted in a manner that prevents the audience from
looking directly into the beam, and the beam from striking the
audience.
operating Modes: The Galaxian Royale can operate in two dif-
ferent modes. In each mode you can run the fixture as a stand
alone fixture or in a master/slave confiugration. This next section
will detail the differences in the operating modes.
• Sound Active mode -
The fixture will react to sound, chasing through the built-in programs.
• DMX control mode -
This function will allow you to control each individual fixtures traits
with a standard DMX-512 controller such as the Elation
Designer.
Master-Slave Operation
units together and operate without a controller. The units will be sound
activated. In Master-Slave operation one unit will act as the controlling
unit and the others will react to the controlling units programs. Any unit
can act as a Master or as a Slave.
1. Using approved DMX data cables, daisy chain your units togeth-
er via the XLR connector on the rear of the units. Remember the
Male XLR connector is the input and the Female XLR connector
is the output. The first unit in the chain (master) will use the female
XLR connector only - The last unit in the chain will use the male
XLR connector only. For longer cable runs we suggest a termina-
tor at the last fixture.
2. On the Master unit find your desired show and set that show by
pressing the ENTER button.
3. On the slave units
played, and Press ENTER. Choose either
press ENTER. Please see page 12 for more info.
4. The slave units will now follow the Master unit.
Sound Active Mode:
units linked together, to run to the beat of the music.
©
™
This function will allow you to link up to 16
tap the MENU button until "SLND" is dis-
This mode allows either single unit or several
American DJ - www.americandj.com - Galaxian Royale Instruction Manual Page 14
®

Operation

Show
®
"SL 1" or "SL 2" and