American DJ Revo Burst User Instructions page 5

Revo Burst
SHND: SH 0 - 12
- Show modes 0-12 (Factory programs).
Show mode can be run with sound activity or without. For show
mode to run without sound activity turn sound activity off.
1. Tap the MENU button until "SHND" is displayed, press ENTER.
2. "Sh X" will now be displayed, "X" representing a number
between 0-10. Programs 1-12 are factory programs, while "Sh
0" is random mode. Press the UP or DOWN buttons to find your
desired show and press the ENTER, then press and hold the
MENU button for at least 3 seconds to confirm.
SOUN -
Sound Active mode.
1. Tap the MENU button until "SOUN" is displayed, press ENTER.
2. The display will show either "ON" or "OFF". Press the UP or
DOWN buttons to select "ON" to activate sound active mode, or
"OFF" to deactivate sound active mode.
3. Press the ENTER, and then press and hold the MENU button
for at least 3 seconds to confirm.
SENS
- Using this mode, you can set the sound sensitivity
level. 0 for least sensitive, 100 for more sensitive.
1. Tap the MENU button until "SENS" is displayed, press ENTER.
2. Using the UP or DOWN buttons adjust the sensivity level to your
desire.
3. When you found your desired level, press the ENTER, and then press
and hold the MENU button for at least 3 seconds to confirm.
BLND -
Blackout or Stand by mode.
1. Tap the MENU button until "BLND" is displayed, press ENTER.
Either Yes or No will be displayed.
2. To activate Blackout tap the UP or DOWN buttons until "Yes"
American DJ Supply - www.americandj.com - Revo Burst User Manual Page 9
© ®
System Menu Revo Burst
is displayed, press ENTER to confim. The fixture will now be in
Blackout mode. To deactivate Blackout mode, select "No" and
press Enter.
LED -
off after 10 seconds.
1. Tap the MENU button until "LED" is displayed, press ENTER.
2. The display will show either "ON" or "OFF". Press the UP or
DOWN buttons to select "ON" to keep the LED display on at all
times, or "OFF" to switch to have the LED display switch off after
10 seconds.
3. Press ENTER to confirm.
DISP
1. Tap the MENU button until "dISP" is displayed, press ENTER.
2. Either "dISP" or "dSIP" will now be displayed. Press the UP or
DOWN buttons to select one or the other.
3. Press the ENTER, and then press and hold the MENU button
for at least 3 seconds to confirm.
TEST
1. Tap the MENU button until "TEST" is displayed, press ENTER.
2. The fixture will now run a self test.
FHRS
of the fixture.
1. Tap the MENU button until "FHRS" is displayed, press ENTER.
2. The running time of the fixture will now be displayed. Press
MENU to exit.
©
With this function you can have the LED display turn
- This will "flip" the LED display 180º.
- This function will run a self test program.
- With this function you can display the running time
American DJ Supply - www.americandj.com - Revo Burst User Manual Page 10
®
System Menu