American DJ Revo Burst User Instructions page 4

Revo Burst
American DJ Supply - www.americandj.com - Revo Burst User Manual Page 7
© ®
System Menu Revo Burst
System Menu: When making adjustments you can press
ENTER to confirm your setup or you can wait 8 seconds for
automatic setup. To exit without making any adjustments
press the MENU button.
ADDR -
1. Tap the either the MENU, UP, or DOWN buttons until "ADDR"
is displayed, press ENTER.
2. The current address will now be displayed and flashing. Press
the UP or DOWN buttons to find your desired address. Press
ENTER to set your desired DMX address.
CHND -
mode and 10 Channel DMX mode.
1. Tap the either the MENU button until "CHND" is displayed,
press ENTER. Either "4CH" or "10CH" will be displayed
2. Tap the UP or DOWN buttons to choose your desired DMX
mode and press ENTER to confim and exit.
SLND -
master/slave configuration.
1. Tap the MENU button until "SLND" is displayed, press ENTER.
Either "MAST", "SL 1" or "SL 2" will be displayed.
2. Tap the UP or DOWN buttons until your desired setting is
displayed, press ENTER to confim.
NOTE: In a Master/Slave configuration you can set one fixture
to Master and then set the next fixture to "SL 2", the fixtures will
now have contrast movement to each other.
©
DMX Address Setting.
This will let you switch between 4 Channel DMX
This will let you set unit as a master or slave in a
American DJ Supply - www.americandj.com - Revo Burst User Manual Page 8
®
System Menu