Repeat Play - Alpine CDA-9851R Owner's Manual

6
To eject the disc, press c.
• Do not remove a CD during its eject cycle. Do not load more than
one disc at a time. A malfunction may result from doing either.
• If the CD does not eject, press and hold c for at least 2 seconds
with the movable display open.
• The CD-player can play discs containing audio data, MP3 data
and WMA data.
• A WMA format file that is protected by DRM (Digital Rights
Management) cannot be played back on this unit.
• "MP3" is displayed during MP3 playback.
• "WMA" is displayed during WMA playback.
• The track display for MP3/WMA data playback is the file numbers
recorded on the disc.
• If the HDA-5460 model is connected to the unit, some operations
(for example changing the source, selecting the file by holding
buttons up or down, etc.), can be carried out on this unit.
MP3/WMA Play Display
The folder number, file number, sampling rate, and bit rate
will be displayed as described below.
File number
display
01
03
Folder number
display
The sampling rate and the bit
rate (frame display*) are
alternately displayed.
File number
display
01
Folder number
display
• Press TITLE to switch the display. Please see "Displaying the
Title/Text" (page 16) for information about display switching.
* The recording sampling rate and bit rate of the MP3/WMA file are
displayed. A WMA file of variable bit rate displays the average bit rate.
12
-EN
44.1 kHz
Sampling rate
display
03
160
kbps
Bit rate
display

Repeat Play

Press 4( ) to play back repeatedly the track being
played.
The track (file) will be played repeatedly.
Press 4( ) again and select OFF to deactivate repeat play.
CD mode :
↓
RPT : Only a track is repeatedly played back
↓
*1
RPT : A disc is repeatedly played back
↓
(off)
*1 When a CD changer is connected
• If REPEAT is set to ON during M.I.X. play in CD changer mode,
M.I.X. will apply to the current disc only.
MP3/WMA mode :
↓
RPT : Only a file is repeatedly played back
↓
RPT : Only files in a folder are repeatedly played
back
↓
*2
RPT : A disc is repeatedly played back
↓
(off)
*2 When an MP3 compatible CD changer is connected
• If a 6-disc CD changer or an MP3 compatible CD changer is
connected:
In CD changer mode, press F to illuminate the "FUNC" indicator,
and go to the step above within 10 seconds.
• If a 12-disc CD changer is connected:
In CD changer mode, press F twice to illuminate the "FUNC"
indicator, and go to the step above within 10 seconds.