Use The Cancel Button; Use The Removable Vacuum Channel; Vacuum Package Using Foodsaver Designer Canisters - FoodSaver Pro Sport GameSaver Vac1500 User Manual

Guide.Pro Sport_w/o seal_v3 7/23/03 10:45 AM Page 14
T H E F O O D S AV E R U S E R M A N U A L
How to Use the Cancel Button
Use the Cancel Button if you want to terminate the vacuum
process before it is complete. This feature will cancel the vacuum
process without sealing the bag. Use this feature if your fragile
food is becoming crushed or if you feel you no longer want to
vacuum package your item.
At any time after you have pressed on the lid you can cancel
1
the vacuum process simply by pressing and holding the Cancel
Button. This will cancel the vacuum process completely.
The green light will turn off and the process will stop.
2
Open the lid and remove the unsealed bag.
3
How to Use the Removable Vacuum Channel
The Vacuum Channel in the Pro Sport, GameSaver and Vac 1500
is fully removable for easy cleaning.
Open the lid of the appliance.
1
Open the sliding door on the right
2
side of the appliance.
Pull out the Removable Vacuum
3
Channel.
Remove gasket from the Vacuum
4
Channel.
NOTE: Vacuum Channel (but not the rubber gasket) is dishwasher
safe in top rack only.
When Vacuum Channel is fully dry, the rubber gasket can
5
be re-inserted.
Insert Vacuum Channel into the appliance.
6
Close sliding door.
7
14
T H E F O O D S AV E R U S E R M A N U A L
How to Vacuum Package Using FoodSaver
Designer Canisters
FoodSaver Designer Canisters are an excellent way to store
delicate items in the refrigerator, pantry or on the countertop.
Set the Sealing Adjustment Switch to the "Accessory" position.
1
Place the item(s) to be vacuum packaged inside the canister. Leave
2
at least one inch between the contents and the rim of the canister.
Place the lid on top of the canister.
3
Insert one end of the Accessory
4
Hose into the Accessory Port on
the appliance. Insert the other end
of the Accessory Hose into the
hole on the top of the canister lid.
Twist the gray hose fitting while
inserting to ensure a tight fit.
Vacuum package as per
5
instructions on page 11,
steps 6 and 7.
Remove the Accessory Hose from
6
the lid by gently twisting the gray hose fitting and pulling up.
IMPORTANT: Remember to remove the Accessory Hose from the
Accessory Port on the appliance before you vacuum package in
FoodSaver Bags. Remove the hose by gently twisting the gray
fitting while pulling it out. Never yank or tug the hose as this
may damage both the hose and the fitting.
How to Open FoodSaver Designer Canisters
To open a FoodSaver Designer Canister, press and hold the
gray rubber button in the center of the lid. This will release
the vacuum and allow the lid to be removed.
15