Onkyo BD-SP808 Quick Start Manual page 2

Connecting to a Digital Audio System
audio
AV receiver / amplifier
digital audio optical
digital audio optical cable
this unit
AUDIO OUTPUT (DIGITAL OPTICAL/COAXIAL)
Network Connection with LAN
· By connecting this unit to the Internet, you can update the software via the Internet, play contents stored on DLNA home media servers
or access BD-Live.
Telecommunications
equipment (modem, etc.)
LAN
LAN cable
Internet
this unit
EN
DIGITAL AUDIO INPUT
DIGITAL AUDIO INPUT
OPTICAL COAXIAL
digital audio coaxial
input jack or input jack
digital audio coaxial cable
(not supplied)
(not supplied)
IR
IN
RS232
Hub or broadband router
W A N L A N
5 4 3 2 1
LAN cable
IR
IN
RS232
Connecting the AC Cord
After you made all necessary connections, connect the AC cord to the AC INLET. Then connect the AC cord to the AC outlet.
Insert the plugs securely. Incomplete connections will result in the generation of noise.
AC outlet
AC cord
AC110-240V, 50/60Hz
Playback
1
ON/STANDBY
Press [ON / STANDBY I/ ].
2
Turn on the TV and select the appropriate input on the TV to which the unit is connected.
3
OPEN/CLOSE
Press [OPEN/CLOSE A] to open the disc tray.
4
Place the disc on the disc tray with its label side facing up.
5
OPEN/CLOSE
Press [OPEN/CLOSE A] to close the disc tray.
It may take a while to load the disc.
6
Playback may start automatically.
• If not, press [B (play)].
To pause playback:
Press [k (pause)].
To return to normal playback:
Press [B (play)].
this unit
IR
IN
RS232
Align the disc to the disc
tray guide.
To stop playback:
Press [C (stop)].
To eject the disc:
Press [OPEN/CLOSE A] to open the disc tray, then remove the
disc before turning off the unit.
EN