Table of Contents
Advertisement
Chapter 6, Call Processing Subsystem
The CALL CONTROL Screen
The CALL CONTROL Screen
Figure 15
The CALL CONTROL Screen
118
The CALL CONTROL screen is the primary Call Processing Subsystem screen. It
contains the most often used call processing configuration and command fields.
shows the CALL CONTROL screen for AMPS, TACS, and
Figure 15 on page 118
JTACS.
The top right-hand portion of the CALL CONTROL screen is used to display the
following information:
•
decoded data messages received from the mobile station on the reverse control channel
or the reverse voice channel
•
modulation quality measurements made on the mobile station's RF carrier while on a
voice channel
•
raw data message bits, displayed in hexadecimal format, received from the mobile
station on the reverse control channel or reverse voice channel when a decoding error
occurs
The type of information to be displayed is selected using the
to the
Display field description, on page 121
Display
for further information.
field. Refer
Advertisement
Table of Contents
