Date And Time - Nokia 6670 User Manual

Go to Settings
→ GPRS.
Connection
Go to Settings
→
Connection Data
74
GPRS
→
The GPRS settings affect all access points using a packet data connection.
GPRS connection
packet data, the phone registers to the GPRS network and sending short messages will
be done via GPRS. Also, starting an active packet data connection, for example, to send
and receive e-mail, is quicker. If you select
connection only if you start an application or action that needs it. The GPRS connection
can be closed after it is not used by any application.
If there is no GPRS coverage and you have chosen
periodically try to establish a packet data connection.
Access point - The access point name is needed when you want to use your phone as a
packet data modem to your computer.
Data call
→
The Data call settings affect all access points using a GSM data call.
call.
Online time - If there are no actions the data call is dropped automatically after a time-
out period. The options are

Date and time

The Date and time
well as change the date and time format and separators.
→
• Clock type
"Clock" on page 97.
• Auto time update
information to your phone (Network Service). For the
effect, the phone needs to be restarted. Check any alarms as these may be affected
by Auto time
Copyright © 2004 Nokia. All rights reserved.
- If you select When available
When
User defined, in which case you enter a time, or Unlimited.
settings allow you to define the date and time used in your phone, as
Analogue or Digital - To change the clock shown in standby mode. See
- To allow the network to update time, date, and time zone
update.
and you are in a network that supports
needed, the phone will use a packet data
When available, the phone will
Auto time update setting to take