Table of Contents
Advertisement
If the alarm time is reached while the device is switched
off, the device switches itself on and starts sounding the
alarm tone. If you select Stop, the device asks whether
you want to activate the device for calls. Select
switch off the device or
not select
Yes
when wireless phone use may cause
interference or danger.
To cancel an alarm, select
alarm.
Clock settings
To change the clock settings, select
Settings.
To change the time or date, select
To change the clock shown in the standby mode, select
Clock type
>
Analogue
To allow the mobile phone network to update the time,
date, and time zone information to your device (network
service), select
Network operator time
To change the alarm tone, select
14
Copyright © 2006 Nokia. All rights reserved.
No
Yes
to make and receive calls. Do
Clock
>
Options
>
Remove
Clock
>
Options
Time
or Date.
or Digital.
> Auto-update.
Clock alarm
tone.
World clock
To open the world clock view, open Clock, and press
In the world clock view, you can view the time in different
to
cities.
To add cities to the list, select
add a maximum of 15 cities to the list.
To set your current city, scroll to a city, and select
Options
>
My current
clock main view, and the time in your device is changed
according to the city selected. Check that the time is
correct and matches your time zone.
>
Headset
Connect a compatible
headset to the Pop-Port
connector of your device.
Warning: When you use the headset, your ability
to hear outside sounds may be affected. Do not use
the headset where it can endanger your safety.
Options
>
Add
city. You can
city. The city is displayed in the
TM
.
Advertisement
Table of Contents
