Settings (Menu 4); Profiles; Tone Settings - Nokia 3200 User Manual

To send a business card to a
compatible phone or other device that
supports the vCard standard: Press
in standby mode, scroll to the desired
name, and press Details. Press
and select Send bus.
infrared or Via text message
service).
When you receive a business card,
press Show and Save
business card in the phone's memory.
To discard the business card, press
and OK.
■ Settings
(Menu 4)
In this menu you can change various
settings of the phone. You can also
reset some menu settings to their
default values.
To access this menu: Press
standby mode and select Settings.

Profiles

Your phone has several setting groups,
'profiles', for which you can customise
the phone tones for different events
and environments.
To access this menu: Press
standby mode and select
Profiles.
1. Select a profile that you want to
activate or whose settings you
want to change.
2. Select Activate,
Timed.
Options
card. Select Via
(network
to save the
Exit
Menu in
Menu in
Settings and
Personalise or
Copyright © 2004 Nokia. All rights reserved.
M e n u f u n c t i o n s
• To activate the selected profile,
select Activate.
• To activate the profile for a
certain amount of time, select
Timed and set the end time.
When this time expires, the
previous profile that was not
timed, becomes active.
• To change the profile settings,
select Personalise. Select the
setting you want to change and
make the change.
For information on the settings,
see

"Tone settings"

With Profile name
rename the selected profile. The
General profile cannot be
renamed.
The name of the currently active
profile is shown in standby mode,
except when the General
active. If the profile is timed,
shown in front of its name.
Tip: To change the profile
quickly in standby mode, press
the power key
the profile you want to
activate.
Tone settings
You can change the tone and vibrator
settings of the currently selected
profile. The same settings can also be
found in the Profiles
page 29.
on page 29.
you can
profile is
is
and select
menu, see
29