Tty Operation - Motorola MOTORAZR V3m User Manual

TTY operation

You can use an optional TTY device with your
phone to send and receive calls. You must
plug the TTY device into the phone's headset
jack and set the phone to operate in one of
three TTY modes.
Note: Use a TSB-121 compliant cable
(provided by the TTY manufacturer) to
connect the TTY device to your phone.
Note: Set the phone to level 4 (middle setting)
for proper operation. If you experience a high
number of incorrect characters, adjust the
volume as needed to minimize the error rate.
Note: For optimal performance, your phone
should be at least 12 inches (30 centimeters)
from the TTY device. Placing the phone too
close to the TTY device may cause high error
rates.
set TTY mode
ù When you set your phone to a TTY mode,
it operates in that mode whenever the TTY
device is connected.
Find it: Press s > w Settings > Initial Setup
1 Scroll to TTY Setup and press the Change key.
2 Scroll to one of the following TTY Setup
options and press the Select key:
option
Voice
Return to standard voice mode.
TTY
Transmit and receive TTY characters.
VCO
Receive TTY characters but transmit by
speaking into microphone.
main attractions 27