How To Set The Menus; Enter Button - Mitsubishi Electric DLP HC3900 User Manual

Menu operation (continued)

How to set the menus:

The following describes how to set AUTO POWER OFF
time as an example.
1. Press the MENU button.
opt.
IMAGE
GAMMA MODE
2. Press the t or u button to select a menu to use.
CONTRAST
opt.
BRIGHTNESS
INSTALLATION COLOR TEM P.
COLOR
SCREEN SIZE
3. Press the ENTER button (or q button).
TINT
VERTICAL LOCATION
opt.
SHARPNESS
LAMP MODE
AUTO POWER
ADVANCED MENU
INSTALLATION
ON
AUTO POWER
AV MENU SAVE
KEYSTONE
OFF
SPLASH
ON
LAMP MODE SCREEN
Available settings in the menus
AUTO POWER
BACK COLOR
ON
Set the following items on their relevant menus. IMAGE
AUTO POWER
REVERSE
OFF
1. IMAGE menu
SPLASH TEST PATTERN
ON
SCREEN
BACK COLOR
ITEM SETTING
IMAGE
REVERSE
GAMMA MODE
TRIGGER OUT
TEST PATTERN SPORTS
LENS LOCK
USER1
USER2
CONTRAST
BRIGHTNESS
COLOR TEMP. 5 options
COLOR
TINT
SHARPNESS
BrilliantColor
TM
ADVANCED MENU
SCREEN SIZE 2 options
VERTICAL
LOCATION
CTI
INPUT LEVEL
ENHANCED /
NORMAL
COLOR ON
MANAGEMENT
AV MEMORY SAVE 3 options
• By using the AV memory function, you can save up to 3 setting patterns of IMAGE menu for each input terminal. (See
page 30.)
• INPUT LEVEL is unavailable when the digital signal is supplied from the YC
AV MEMORY 1
AUTO
0
0
MIDIUM
AV MEMORY 1
0
WXGA (FULL)
0
0
0
STANDARD
OK
AV MEMORY 1 OFF
AV MEMORY1
OFF
0
ON
STANDARD
BLUE
OFF
OFF
OFF
CROSS HATCH
ON
BLUE
FUNCTION
OFF
AUTO The proper gamma mode is automatically selected
OFF depending on the input signal. Default is AUTO.
CROSS HATCH This is a bright mode suitable for watching sports
images.
OK
VIDEO This is a standard mode suitable for watching video
images, etc.
CINEMA This is a mode for watching movies in dim lighting as
in a theater.
Select to adjust the gamma curve. (See page 33.)
/
±30 Use to adjust the contrast of the projected image. (See
page 31.)
±30 Use to adjust the brightness of the projected image.
(See page 31.)
Use to adjust the color temperature. (See page 32.)
±10 Use to adjust the color thickness of the projected image. (See page 31.)
±10 Use to adjust the color tint of the projected image. (See page 31.)
±5 Use to adjust the sharpness of the projected image. (See page 31.)
AUTO BrilliantColor
0 - 10 Use this setting to make colors with medium brightness, such as yellow and the skin tone appear
natural. Press the t button to decrease the value to lessen the effect. Press the u button to
increase the value to heighten the effect. (BrilliantColor
• For more enhanced color reproduction, set BrilliantColor
wheel is disabled, and you can reproduce true-color images.
Select according to the screen size.
±26 Use to adjust the position (height) of the projected image.
0 - 5 Use to correct smeared color boundaries.
±5 For analog signal input: The input level of video signal differs among devices to be connected.
High input level causes solid white in displayed image and low input level causes displayed image
to get dark. Use this menu to adjust the input level of analog video signal.
AUTO / For digital signal input:
AUTO:
ENHANCED:
NORMAL:
(See page 16.)
/ OFF When you turn COLOR MANAGEMENT on, you can change to any desired color by adjusting
each of GAIN and SATURATION of six different colors. (See page 33.)
Select the AV MEMORY to which you save the current setting. (See page 30.)
INSTALLATION
4. Press the p or q button to select an item to adjust.
INSTALLATION
ON
5. Set the selected item by pressing the t or u button.
ON
To cancel the menu:
6. Press the MENU button several times.
Important:
• When the MENU button doesn't function, unplug
the power cord from the wall outlet. Wait about 10
minutes, plug the power cord in, and try again.
• After selecting the items marked with

ENTER button.

works automatically in response to the gamma mode. (See page 31.)
TM
The proper setting is automatically selected.
Select when solid black occurs.
Select when grayish black occurs.
EN-26
opt.
SVGA60
AV MEMORY 1
SCREEN SIZE WXGA (FULL)
VERTICAL LOCATION 0
opt.
SVGA60
LAMP MODE STANDARD
AV MEMORY 1
AUTO POWER
OFF
ON
SCREEN SIZE WXGA (FULL)
AUTO POWER
OFF
OFF
VERTICAL LOCATION 0
SPLASH
ON
SCREEN
LAMP MODE STANDARD
BACK COLOR BLUE
AUTO POWER
OFF
IMAGE
ON
OFF
REVERSE
AUTO POWER
30 min
OFF
TEST PATTERN CROSS HATCH
SPLASH
ON
SCREEN
BACK COLOR BLUE
IMAGE
OFF
REVERSE
TEST PATTERN
CROSS HATCH
1. IMAGE menu
IMAGE
GAMMA MODE
CONTRAST
BRIGHTNESS
COLOR TEMP.
COLOR
TINT
SHARPNESS
BrilliantColor
ADVANCED MENU
AV MEMORY
SAVE
has no effect at value 0.)
TM
to 0. The white area of the color
TM
C /YP P terminal of the connected device.
B R B R
, press the
opt.
AV MEMORY 1
AUTO
0
0
MEDIUM
0
0
0
TM AUTO
OK
AV MEMORY1