Lubricating The Brew Unit - Miele CVA 620 Operating Instructions Manual

^ Remove the brew unit.
^ Fit the hexagonal key supplied to the connection
point in the brew unit, turn anti-clockwise while
gripping the filter firmly.
^ Remove the filter with the screw.
^ Clean the filter with hot water and dry thoroughly.
^ Replace the filter in the brew unit and secure it by
carefully turning the hexagonal key clockwise,
while gently pressing down on the filter to ensure
that it is engaged correctly.

Lubricating the brew unit

^ Remove the brew unit carefully.
While carrying out the following
procedure ensure that the brew unit is
correctly set up. The funnel must be set
slightly higher and the socket standing vertically
(see the illustration, or the problem solving guide).
^ Smear a little of the silicone lubricant supplied on
the joints a, in the axle b on the runners c and
on sealing ring d.
Replacement tubes of silicone lubricant are
available to order from your Miele Dealer or from the
Spare Parts Dept.
Cleaning and care
53