Setting The Display - Miele CVA 5060 Operating And Installation Manual

If the water is harder than 40°dH/7.0
mmol/l, limescale will build up more
rapidy than with soft water.
Descaling will need to be carried out
more regularly than stated to
prevent limescale damage to the
machine.
^ Select "Settings F" from the Main
menu, and then touch the OK sensor.
Settings
Water hardness
Display
^ Use the arrow sensors to highlight
"Water hardness" and then touch the
OK sensor.
^ Touch one of the arrow sensors to set
the water hardness, and then touch
the OK sensor.
The water hardness level selected is
saved to memory.
Settings: Customising your machine

Setting the display

You can adjust both the contrast and
the brightness of the display:
^ Select "Settings F" from the Main
Settings
Display
Volume
^ Touch the right arrow sensor until
^ Touch one of the arrow sensors to
^ Touch one of the arrow sensors to set
^ Touch the OK sensor to save the
menu, and then touch the OK sensor.
"Display" is highlighted and touch the
OK sensor.
select "Contrast" or "Brightness" and
touch the OK sensor.
the contrast lower or higher or the
brightness lighter or darker.
setting.
37