Fitting The Standard Floorhead - Miele S 5000 series Operating Instructions Manual

Preparing for use

Fitting the standard floorhead

^ Push the suction tube into the
floorhead and turn it clockwise or
anti-clockwise until it clicks into
position.
^ To release the floorhead from the
suction tube, press the release
button (see arrow) and pull the
suction tube away from the floorhead.
The floorhead can be used for all
normal cleaning of carpets and rugs. It
can also be used with the brush
protruding to vacuum hard flooring. For
hard flooring, such as stone and
parquet, we recommend using one of
the special Miele floor brushes (see
"Optional accessories").
It is important to observe the flooring
manufacturer's cleaning and care
instructions.
Vacuum carpets and rugs with the
brush retracted:
^ Press the foot control
Clean hard flooring which is not
susceptible to scratching with the brush
protruding:
^ Press the foot control
Clean flooring which has deep
crevices or grooves with the brush
protruding.
12
.
.
Classic Allergotec floorhead /
Turbobrush / Electrobrush
Some models may be supplied as stan-
dard with one of these accessories (see
"Optional accessories"). Please refer to
the separate operating instructions
supplied with these brushes for
instructions on use and maintenance.