Automatic Rinsing - Miele CVA 2660 Operating Instructions Manual

Built-in coffee machine
Hide thumbs Also See for CVA 2660:
Table of Contents

Advertisement

Automatic rinsing

Settings: Customising your machine
^ A bar will appear. Turning the right-hand dial
anti-clockwise will make the bar smaller and decrease the
lighting, contrast or brightness.
Turning the right-hand dial clockwise will make the bar
bigger and increase the lighting, contrast or brightness.
^ Press the right-hand dial to save your setting.
The previous display menu will now appear and the A
symbol for "Back" will be highlighted in the display.
^ Press the right-hand dial again to reach the exit menu of
this display.
PROGRAMMING
F
Y K
To remove any coffee grounds from the system, the water
piping must be rinsed through before the first drink of the day
is prepared. If programme option "Automatic rinsing" is set to
"On", rinsing will start automatically when the machine is
switched on and cold. This will also pre-heat the system
because hot water is used for the rinse process. A message
will appear in the display to let you know what is happening.
The machine will also run an automatic rinse before it
switches off, if it has been used to prepare a drink.
To prevent water from running into the drip tray
always place an empty cup under the spouts
before making the first drink.
SETTINGS
K 1
2
^ Turn the left-hand dial until you reach the "Settings" menu.
PROGRAMMING
F
Y K
^ Turn the right-hand dial until the "Programming" symbol is
highlighted and then press the dial to confirm your
selection.
n
I
J
I
F
3 4
5
L
o
n
I
J
I
Z
n
G
k
C
Z
23

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents