Setting Down, Transportation And Storage; Park System - Miele S 500 Operating Instructions Manual

Setting down, transportation and storage

Park system

A Park system has been designed for
conveniently parking the vacuum
cleaner during pauses. A special park-
ing attachment is fitted to all floorheads
including the Electrobrush and to the
rear of the cleaner.
^ Fit the lower clip on the floorhead into
the slot on the end of the vacuum
cleaner from above (see illustration).
Switching on and off with the Park
system
(depending on model)
Parking the floorhead in this way whilst
vacuuming automatically switches off
the cleaner. Lifting the floorhead out of
the Park system switches the cleaner
on again.
If your vacuum cleaner is equipped
with +/- suction power selector controls
you can de-activate or activate the Park
system's On-Off function.
^ Switch the vacuum cleaner off with
the On-Off switch.
^ Press and hold the + and - controls in
and at the same time switch the vac-
uum cleaner on with the On-Off
switch.
If you intend leaving your vacuum
cleaner parked in this way for any
length of time, you must switch it off at
the socket, unplug it and rewind the
mains cable.
22