Activating And Deactivating The Buzzer - Miele T 8402 C Operating Instructions Manual

Activating and deactivating the
buzzer
A buzzer sounds (at intervals for a
maximum of 1 hour) to let you know
the programme has finished.
The tumble dryer is delivered with the
buzzer activated but you can
deactivate it if wished.
If there is a fault, a continuous tone will
sound even if the buzzer has been
deactivated.
Follow the steps ( , ,
programme and store in memory.
Before you begin, ensure that:
– The tumble dryer is switched off.
– The door is closed.
– The programme selector is at Finish.
Press the Start button and keep it
pressed in whilst carrying out steps
- .
Switch the dryer on.
Wait until the Start indicator lamp
lights up constantly . . .
. . . and then release the Start button.
The Cool air lamp will flash four times.
The flashing sequence of the
Drying lamp shows which option is
currently selected.
– If the Drying lamp is not flashing:
– If the Drying lamp is flashing:
...) to
The setting you have selected is now
stored in memory. You can change it
again at any time.
To check the setting:
^ Carry out steps
^ Switch the dryer off after checking
Programmable functions
Turn the programme selector to
Cottons Low temperature.
the buzzer is deactivated
the buzzer is activated (factory
default setting).
Pressing the Start button switches
between the 2 options.
Switch the dryer off.
the setting as described above.
to .
45