Table of Contents
Advertisement
26
The system lock is
activated.
The fluff filter in the door is
blocked.
The vent ducting or the
ventilation outlet (e.g.
window or wall vent) is
blocked.
Ventilation to and from the
dryer is insufficient (e.g. in
a small room)
The vent ducting is very
long.
If you wish to use the dryer,
the system lock must be
deactivated (see "Electronic
system lock").
Clean the fluff filter (see
"Cleaning and care").
Check all parts of the
extraction system on a regular
basis (e.g. wall vent, external
grille, bends in the ducting
etc.) and make sure they are
free of any hindrance.
Remove any fluff.
Open a door or window while
drying for increased air flow.
The check lamp will go out
when the door is opened.
See "Installation - venting" on
calculating length and
diameter. See also notes in
"How to dry correctly".
If very long ducting is used
then programme times will be
longer and energy
consumption higher.
Hide quick links:
Advertisement
Table of Contents
