The fluff which is created by the
drying process is collected in the fluff
filter in the door. Clean the filter after
drying cycle.
^ Open the door and pull the fluff filter
out of the door as illustrated.
^ Use your fingers to remove the fluff
from the surface of the filter.
^ Remove any fluff from the hollow part
of the door holder.
A cleaning brush is available as an
optional extra from your Miele dealer
or the Miele Spare Parts Department.
You can also use a vacuum cleaner.
^ Once clean, push the filter back into
the door holder until it clicks into
position. Ensure it is facing the
correct way. Close the door.
^ After cleaning shake thoroughly until
no more water droplets are visible.
^ Dry the filter carefully.
^ Push the filter back into the door
holder until it clicks into position.
Make sure it is the right way round.
21