Altering A Programme; To Interrupt A Programme; To Cancel A Programme And Select A Different Programme - Miele T 260 Operating Instructions Manual

If the programme selector is turned to a
different programme after a programme
has begun the Anti-crease/Finish indi-
cator light will flash. The indicator light
will go out when the selector is returned
to its original position and the
programme will continue from where it
was beforehand.
After a programme has started, not all
additional options can be switched on
or off (see section "How to dry cor-
rectly").
^ Switch off the dryer with the
I-ON/0-OFF button.
To continue drying:
^ Switch the dryer back on with the
I-ON/0-OFF button.
The programme will continue, as long
as the cooling down phase has not
been reached.
^ Turn the programme selector to Fin-
ish .
The Anti-crease/Finish indicator light
will flash by itself to indicate that the
programme has been cancelled.
^ Turn the programme selector to the
programme you require.
^ Switch additional options on or off as
required.
^ Press the START button.
^ Press the Door button and open the
door.
,
Do not touch the back of the
drum when adding or removing
items. The drum could be very hot -
danger of burning.
^ Items can now be added or removed
early.
To continue drying:
^ Close the door.
^ Press the START button
– The programme will continue.
– The time left shown in the display
may now vary from the actual drying
time.
19