Miele H 5740 B Operating And Installation Manual page 56

Problem solving guide
Problem
The halogen lamp
needs replacing.
Cakes and biscuits
are not cooked
properly after
following the times
given in the chart.
Cakes / biscuits are
browning unevenly.
A fault code
appears in the
display: F + a
number
56
Possible cause and remedy
^ Disconnect the appliance from the electricity supply:
Switch off and unplug at the socket, or disconnect the
fuse, or switch off at the isolator as appropriate.
^ Remove the shelf runners.
^ Use the lever supplied to release the lamp cover from its
frame.
^ Replace the lamp with a new one (Osram 64418, 12 V,
10 W, G4).
Do not touch the surface directly when changing the
lamp as grease particles from your fingers will adhere to
the surface and damage the lamp. Please follow the
manufacturer's instructions.
^ Push the lamp cover back into its frame, and replace the
shelf runners.
^ Reconnect the appliance to the mains electricity supply.
– Check that the correct temperature has been set.
– Check whether there has been a change to the recipe.
The addition of more liquid or more eggs makes a
moister mix which would need longer to cook.
There will always be a slight unevenness. If browning is
very uneven check that the correct temperature was set
and that the correct shelf level was used.
With conventional heat
used plays an important role. Light coloured, shiny tins are
less suitable.
You can rectify the faults with the following codes yourself:
– F 55: Safety switch-off has been activated.
The appliance will be ready for use again after it has
been switched off and then back on again.
For all other fault codes please contact the Miele Ser-
vice Department.
the material and colour of the tin