Miele G 673 Operating Instructions Manual page 67

The weight of the door front will af-
fect the functioning of the door
springs. After fitting it is essential for
this to be checked out. See Step 6.
The door front is fixed to the machine
door outer panel using a fixing bracket.
This fixing bracket has to be pre-
mounted on the rear of the door front.
When the dishwasher is delivered the
fixing bracket is secured to the dish-
washer. To remove it:
Loosen the fixing screws (arrow) on
each side of the machine door outer
panel.
Push the fixing bracket upwards
from the sprung bolts and remove.
Remove the protective packaging.
Installation
67