Miele G 660 Operating Instructions Manual page 53

The slides make installation of the dish-
washer easier and protect the floor
from possible damage when moving
the appliance into and out of the re-
cess. They are also used for adjusting
the height of the rear screw feet.
Adjust the height manually before in-
stalling the dishwasher. Leave a
space of approx. 5 mm below the
worktop to allow the dishwasher to
be pushed back easily into the re-
cess. Make sure that the dishwasher
stands level.
Press the slides - with the ratchet at
the rear - under the screw feet.
Installing integrated "i" Dishwashers
Push the dishwasher right back into
the recess. Ensure that drain hose,
inlet hose and electric cable are laid
to reach the connection point without
any kinks.
53