Fitting Building In Frame And Installing The Dishwasher - Miele G 307 Operating Instructions Manual

Installation
7. Fitting the building-in
frame and installing the
dishwasher
Apply moisture protector
Seal the cracks between the side
walls and the recess floor and any
unprotected cut surfaces with the sili-
con sealant provided.
To screw the foot holds in place.
Secure the foot holds (6) each with
two wood screws 4 x 15 (15) to the
side walls of the tall unit recess.
The distance from the front edge of
the unit to the front edge of the foot
holds must measure 450 mm.
The bottom bracket lug must rest on
the recess floor.
56
Fitting the side and top frame strips.
When the recess width measures 562 mm
(wall thickness 16 mm) the spacer (3)
fitted to the side frame strips should be
replaced by the thinner spacers (4)
suppied.
Flap out spacer (3) and remove.
Fit spacers (4) and fold in.