Miele G 1420 Operating Instructions Manual page 52

Problem solving guide
Problem
Dishes, cutlery and
glasses are not dry
or are flecked.
White residue is
visible on cutlery
and crockery,
clouding occurs on
glassware; film can
be wiped off.
52
Possible cause
The rinse aid amount may
be insufficient or the rinse
aid reservoir empty.
Crockery was taken out of
the cabinet too soon.
You are using "2 in 1" or
"3 in 1" tablets, which do not
have a strong enough
drying performance.
The "2 in 1/3 in 1 Tab"
function is switched on,
even though this type of
detergent has not been
used.
Not enough rinse aid was
used.
There is no salt in the salt
reservoir.
The salt reservoir cap has
not been screwed on
correctly.
An unsuitable "2 in 1" or
"3 in 1" tablet has been
used.
There is a fault with the auto-
matic water softening
system.
Remedy
Replenish the reservoir,
increase the dosage or
change the brand of rinse
aid. See "Before using for
the first time".
Leave it in for longer. See
"Operation".
Set the Tab function to
"Normal", and fill the rinse
aid reservoir with rinse aid.
Set the Tab function to the
detergent product being
used (see "Tab function").
Increase the dosage. See
"Before using for the first
time".
Fill the salt reservoir. See
"Before using for the first
time".
Replace it, making sure that
it screws back on correctly.
Change your detergent. Use
a standard liquid, tablet or
powder detergent, and refill
the salt and rinse aid
reservoirs in the dishwasher.
Call the Service Department.