Advertisement
^ Before installing the appliance secure
wood trim h to the left hand side of
the recess using the two 3 x 20 mm
Spax screws g supplied (see
illustration).
Dimension
is:
30 ± 5 mm for a recess height of 350
mm
40 ± 5 mm for a recess height of 360
mm.
^ Push the appliance into the recess.
After aligning the appliance it must
be secured against slippage. Do this
by screwing the four 3.5 x 25 mm
wood screws i (supplied) into the
vertical strips on either side of the
appliance (see illustration).
Please note that you will need to
mark and pre-drill the two left hand
fixing holes (C 2.5 mm) in the wood
trim before securing the appliance.
15
Advertisement
