Initial Camera Setup - Vivitar ViviCam S529 User Manual

Initial Camera Setup

Installing the Battery
To Charge the Battery:
 Insert the battery as shown above.
 Power off the camera.
 Connect the camera using the USB cable
to the computer‟s USB port or to the AC
Adapter (which is then connected to a
standard wall socket).
 The charge light will turn off when the
battery is fully charged.
Turning On the Camera
Installing the Memory Card
 SD Memory card
(up to 32GB)
needed for normal use
(not included)
Using the Camera
4
Selecting
the modes
Accessing the menu