Powering The Camera On/Off - Vivitar ViviCam 46 User Manual

Powering the Camera On/Off

 Make sure the batteries have been inserted properly into your digital camera. If your camera
comes with a rechargeable lithium battery, make sure it is fully charged before the first use.
 Make sure an SD card has been inserted into your camera.
(SD card up to 32GB - SD Card not included)
Please see Initial Camera Setup for more information.
Powering the camera ON
Press the Power button to turn your camera ON.
 After powering on, the camera emits a sound and the LED light turns on briefly.
 The LCD screen turns on with your camera in Photo Capture mode to start.
Powering the camera OFF
While the camera is on, you can press the
camera OFF.
 A "Goodbye" screen appears and then the camera will power off completely.
Note: Your digital camera also has an Auto Power Off feature that will automatically turn off your
camera after 1 minute.
Power button again at any point to turn your
10