Installing The Vivitar Experience Image Manager Software And Camera Driver; Connecting Your Camera To The Computer - Vivitar 91372, 91373 User Manual

Installing the Vivitar Experience Image Manager Software and Camera Driver

Warning: Do not plug your camera into the computer until the Vivitar Experience Image Manager
software installation is complete.
1. Insert the installation CD into your CD-ROM drive. The Vivitar Experience Image Manager
will begin to install.
2. Please review the license terms.
On PC and Macintosh: Click the "I accept the terms of this license agreement" and then
click "Next" to continue.
3. On PC only: Let the "Vivitar Experience Image Manager" installer create the folder to
where the program will be installed, and then click "Install".
4. Please wait while the application continues the installation process on your computer.
Follow all instructions.
5. On PC: Click the "Close" button when the installation is complete.
The application automatically opens.
On Macintosh: Click the "Quit" button when the installation is complete.
6. If you closed the application, click on the Vivitar Experience Image Manager desktop icon
or run and open the application from the Start\Programs menu on your computer.

Connecting your Camera to the Computer

1. Use the USB cable that came with your camera to connect your camera to your computer.
2. Plug the one end of the USB cable into the USB slot on the side of the camera and plug
the other end into an available USB port on your computer.
3. Your camera will automatically turn on.
4. The first time you connect the device to the computer you will have to wait a few moments
until the computer recognizes the device.
11