Retaining Plates - Miele Imperial DWF 956-2 Operating And Installation Instruction

Installation
The retaining plates A, B and C are
used to secure the cooker hood to the
wall.
– Before fitting the retaining plates
draw a centre line on the back wall
at the selected position.
Then drill holes for attaching the vapour
canopy and for fitting retaining plate A.
22
– Mark the measurement
cooking surface. This marks the
height of the lower rim of the cooker
hood.
– Drill four 8 mm Ø holes in the wall as
shown and press S8 plugs into the
holes.
– Screw retaining plate A to the wall
with 5 x 40 mm screws through both
holes and use the two notches to
help you align it with the centre line.
above the