I, the undersigned M. Bowden of Husqvarna
Outdoor Products, Aycliffe Industrial Park,
NEWTON AYCLIFFE, Co. Durham. DL5
6UP. Certify that the product:-
Category........ Electric Lawn Trimmer
Make.............. Husqvarna Outdoor
Products
Conforms to the specifications of Directive
2000/14/EC
Type of Cutting Device.............. Cutting Line
Identification of Series............... See Product Rating Label
Conformity Assessment Procedure....ANNEX VI
Notified Body.........................Intertek, Cleeve Road, Leatherhead,
Other Directives:-.......................98/37/EC, 89/336/EEC,
& applicable standards:- EN786, EN60335-1, EN60335-2-91,
EN61000-3-2, EN61000-3-3, EN55014-1, EN50366
Our policy of continuous improvement means that the specification of products may be altered from time to time without prior notice.
5119675-03
EC Declaration of Conformity
I, the undersigned M. Bowden of Husqvarna
Outdoor Products, Aycliffe Industrial Park,
NEWTON AYCLIFFE, Co. Durham. DL5
Certify the maximum weighted sound
6UP
pressure level recorded on a sample of the
above product at the operator position
under free field conditions was: -
Surrey. KT22 7SB England
73/23/EEC
Husqvarna Outdoor Products
Aycliffe Industrial Park
NEWTON AYCLIFFE
Co.Durham DL5 6UP
Telephone - 0870 609 1901 Fax - 0870 609 1902
Type........................................................ SET250
Width of Cut............................................ 25 cm
Speed of Rotation of Cutting Device.......10500 RPM 10300 RPM
Guaranteed sound power level...............96 dB (A)
Measured Sound Power Level................91 dB (A)
Level........................................................77 dB (A)
Value....................................................... 2.92 m/s
Weight..................................................... 3.26 kg
ENGLAND
I, the undersigned M. Bowden of Husqvarna
Outdoor Products, Aycliffe Industrial Park,
NEWTON AYCLIFFE, Co. Durham. DL5
Certify the maximum weighted root
6UP
mean square value recorded on a sample
of the above product at the operators hand
position was: -
Newton Aycliffe, 21/11/2006
M. Bowden,
Research & Development Director
SET300
30 cm
96 dB(A)
94 dB (A)
81.4 dB (A)
5.06 m/s
2
2
3.45 kg